How do you remove the head from a Homelite trimmer?

Reach your fingers over the cover until you can feel the two tabs on opposites sides of the cover. Squeeze the tabs together, and lift the cover at the same time. The cover should come right off.

Who makes Homelite trimmer?

Techtronic Industries
John Deere acquired the brand in 1994. Techtronic Industries acquired Homelite from John Deere in 2001. Homelite has shifted its production primarily to consumer level lawn and garden equipment and light duty chainsaws.

How do you change a head on a trimmer?

Replace the trimmer head Remove the spool of line from the trimmer housing. The most common method is to push in, twist and pull off the spool. If your trimmer head differs, follow the manufacturer’s instructions to remove the old head. The head is attached to the trimmer with a retaining nut or bolt.

How do you use a bump feed trimmer?

Bump feed electric weed eaters With a bump feed weed eater, when you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris.

What happens if you mix too much oil with gas?

Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel. But running a two-cycle engine with too little oil can actually destroy the unit.

How to reload string on a Homelite Trimmer?

Turn the trimmer off and disconnect the wire on its spark plug. Turn the trimmer over to access the spool retainer.

How do you remove the head of a Homelite Trimmer?

– Invert the trimmer, and stand it vertically with the cutting head at the top. – Loosen the “bump knob” or “bump head” by unscrewing it using a counterclockwise turning motion. – Remove the inner string reel from the interior of the cutting head and set it aside as well. – Grasp the shaft housing firmly with your left hand.

What is the oil mixture for Homelite ZIP start Trimmer?

Oil-to-Gas Ratios. Two-cycle engines use a mixture of oil and fuel to power and lubricate the engine.

How to replace fuel line on Homelite Weedeater?

Needle nose pliers