How do I remove the stand from my Samsung Syncmaster 2333?

Place a soft cloth over the table to protect the product and place the product face down. Turn the connecting screw at the bottom of the stand to separate it. Pull the stand base from the stand body to remove.

How do I remove the Sceptre monitor stand?

To remove the stand, lay the monitor flat on a table. Unscrew the two screws indicated and you can pull the stand completely off.

How do I open my Samsung monitor?

1. Disconnect the power cable and any peripherals connected to the monitor.
2. Disconnect the stand from the monitor.
3. Remove all case screws fastening the back panel to the front panel.
4. Use your flat-head screwdriver to pry up the tabs on the shield lamp.
5. Lift the shield away from the panel and disconnect the LVDS cable.

How do I remove a VESA mount from a monitor?

Remove the VESA plate from the VESA mount by pressing down on the plastic tab to release the lock. Pull the plate upward to remove. Place the monitor face down on a flat surface. Align the VESA plate holes with the holes on the back of the monitor.

How do I remove the stand from my Philip monitor?

Detach the base stand away from the base column by: (1) Use your fingers to loosen the screw located at the bottom of the base. (2) Gently move up-and-down to release the latch that locks the base and pull the base away from the base column.

How do I remove the stand from the Samsung SyncMaster?

Here are the undocumented steps to removing the stand from the Samsung SyncMaster. 1. Lay the monitor face down on a surface, protecting the LCD from damage and letting the stand and swivel base hang over the edge of the surface.

How do you remove the Guide stand on a Samsung TV?

Remove the screws holding the guide stand to the television, using the Phillips-head screwdriver. Place a small bit of masking tape, sticky side out, onto the head of the screwdriver. Press the head of the screwdriver against the screw in the screw well and lift the screw out, using the tape adhesive.

How do I remove the stand from my monitor?

Remove the two screws that hold the halves of the stand (B)together (located underneath the stand near where it attaches to the monitor). 5. Gently pry the two halves of the stand apart. You should have just the metal bracket on the monitor (C illustration 2) 6. Turn the monitor over carefully. 7.

How do you remove a TV stand without damaging it?

You need only a Phillips-head screwdriver to remove the stand and prepare your TV for the next step. Spread a soft blanket or cardboard box slightly larger than the screen of the television out onto a flat surface. This will help protect the screen while you remove the stand.