How do I change the 4 digit code on my Schlage keypad?

How to Change the 4 Digit Code on a Schlage Lock?

1. Step 1: Press the Schlage button and number 1 at the same time.
2. Step 2: Enter your new four-digit code.
3. Step 3: Re-enter your new code.

What does the button on the back of a Schlage Lock do?

If you want to disable the alarm in the future, you’ll hold down the button until there are two flashes. The alarm will default to using the Forced Entry alarm mode, but if you want to change which alarm mode is used, just press down the inside Schlage button again. Each button press will change the alarm mode.

How do I reset my Schlage keypad to factory settings?

To factory reset the Schlage Encode BE489 Lock you:

1. First need to remove the back cover plate to expose the inside of the lock.
2. Press and hold the reset button of the lock.
3. This starts the reset sequence within the lock.
4. The lock is now reset, but it will also need to determine how it is installed on the door.

How do I change my 4 digit Schlage Lock code without programming code?

Press and hold the outside Schlage button. While holding the Schlage button, reconnect the batteries and release the button afterward. This will reset the lock.

How do you change the 4 digit code on a Schlage Lock fe575?

Enter the Programming Code and wait for the Schlage button to illuminate orange three times, followed by three beeps. Press the Schlage button and press key 1. Then wait for three orange lights and three beeps. Enter a new User Code (4 digits) and wait for three orange lights and three beeps.

Why does Schlage lock beep?

The beeper is there to confirm a successful unlocking or locking of the smart lock when using the keypad, as well as confirming each press of a number. The alarm is there to ward off any undesirables from entering your house without your permission.

How do you reset a 4 digit Schlage Lock?

Press the Schlage button and then press 3. Wait for the lock to beep three times and flash orange light times. Enter your new Programming Code and wait for the usual 3 orange flashes and 3 beeps. Re-enter the new Programming Code to complete the change.

How do you reset a Schlage door lock?

Reset the Schlage lock by engaging the reset button if one is available, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.

How to rekey a Schlage?

A Clean Workspace

How to rekey Schlage Lock without original key?

After the first incident with the Domino’s bandit,I installed security flood lights around our house,plus in several spots in our yard.

How to repair a Schlage Lock?

Replacement pins

How to install your Schlage keyed entry lock?

Schlage’s F Series Handlesets are the perfect finishing touch for your exterior doors, and they are incredibly simple to install. This video walks you through each step of installation to make the process even easier.